1 x Eleaf iStick Pico Dual MOD (without cells)
1 x QC USB Cable
1 x RC Adapter - 1 x User Manual
View Authenticity Certificate Specs & Features
Requires 2 x 18650 High-Drain Batteries (Sold Separate) Size: 46mm44mm75mm Thread type: 510 Threaded Battery type: high-rate 18650 cells Battery type: (Continuous discharge current should be above 25A) Output wattage: 1-200W Output mode: VW/TC(Ni,Ti,SS,TCR-M1,M2,M3) Resistance range: 0.05-1.5ohm (TC modes) Resistance range: 0.1-3.5ohm (VW mode) Temperature range: 100－315℃/200－600℉(TC modes) Output voltage: 0.5-9V Maximum charging current: 1.5A Maximum output current: 50A New Power Bank Feature Firmware Upgradeable OLED Display Screen Dual Circuit Protection Reverse Polarity Protection
WARNING: This is an advanced Item. Please use at your own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Zamplebox is not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.
Be the first to review Eleaf iStick Pico Dual 200W TC Vape MOD!Write a review
You're all signed up for our newsletter!
By entering, you certify that you are of legal smoking age.