1 x SMOKTech TFV8 X-Baby Sub-Ohm Tank 1 x SMOK V8 X-Baby Q2 Core 0.4ohm Dual Coil Atomizer Head (Pre-installed) 1 x SMOK V8 X-Baby M2 Core 0.25ohm Dual Coil Atomizer Head 1 x SMOK TFV8 X-Baby Replacement Glass 1 x Set of Spare Parts
View Authenticity Certificate Specs & Features
Dimensions: 59mm x 24.5mm Diameter: 24.5mm 510 Threaded 4.0ml e-Liquid Capacity Top Fill Swivel Design with Large Fill Hole Larger Heating Air Tube for Higher Airflow Efficiency Top Airflow Control Valve Large Dual Adjustable Airflow Slots Wide Bore Delrin Drip Tip Large Central Airflow Chamber Stainless Steel Construction Utilizes SMOK X-Baby Beast Brother V8 Core Atomizer Heads for Variable Wattage Includes (1) V8 X-Baby Q2 Core 0.4ohm Dual Coil Atomizer Head (Pre-installed) (Designed for 40 - 80 Watts) Includes (1) V8 X-Baby M2 Core 0.25ohm Dual Coil Atomizer Head Optional V8 X-Baby RBA Head (Sold Separately)
WARNING: This is an advanced Item. Please use proper precautions and handling. Ni200/Ti is designed for use only with devices equipped with circuit boards capable of controlling coil temperature. Images are for illustration purposes only. Actual color, finish and packaging may vary
I didn't buy this tank from here as it was not available on this site at the time of my purchase. I love this tank! Smooth warm flavorful vape from the 0.4 ohm coils at 52-55 watts. No leaking, none! I carry my mod/tank in my pants or vest pocket all day at work & am constantly on the move (no desk job here) & in the 2 weeks I have had it has not leaked at all. Still using the original coils too after 2 weeks & they are on point. Smok got it right with this one. Easy top fill with no cap to keep track of, just press down, twist open & fill it up.
This is a step up from my MELO 4 tank. I can run the coils at a lower wattage without losing flavour or clouds, and the 4 ml capacity lasts me all day.
Only downer is that the swivel top comes open too easily, and I've had to deal with spilled juice in my messenger bag. I'm actually getting a collar 3d printed for it in order to prevent the swivel top from opening up when it's not being filled.
Other than that, I strongly recommend this tank. However, in case you want to make a collar, the inner diameter should be 22.5 mm, the inner height should be 6 mm, and the top hole should be at least 16 mm in diameter for the drip tip. Remember to account for printer tolerances :)